Front Entry Door Seal, Piper PA-28, PA-32, PA-34 Thru 1975. ADS-P301-1

HIGH PERFORMANCE AIRCRAFT DOOR AND WINDOW SEALS

FAA-approved revolutionary new seal design!

Nearly a year of development and testing went into creating this revolutionary new sealing material. This new seal for General Aviation Aircraft is the result of a space age material developed for NASA. It is ideal for airplanes because it conforms to the sealing surfaces, forming a perfect sealing bond between the door and the fuselage. Custom extruded from a special hybrid rubber compound, the new seal is superior to any seal on the market.

The hybrid rubber compound sealing material is unique because it compresses under pressure from the door. When the door stops applying pressure against the seal, the seal no longer compresses and actually makes an impression of the surface pressing against it. This seal conforms to surfaces so well that when you open the door you will actually see a perfect imprint in the seal of every rivet and seam!

The seal has the ability to compress from its full thickness to as small as 1/32" thick without losing its sealing ability.  The hybrid compound meets Military Specifications (Mil Spec) and is now certified for use on single engine aircraft by the FAA, requiring only a log book entry. The seal is FAA-PMA APPROVED, Affordable, and Made in the USA. The new seals are available at a fraction of the cost of OEM seals and benefits of their use include an airtight and water tight fit, and greatly reduced cabin noise for even more enjoyable flying!

Adhesive Remover: One of the toughest parts of replacing your seals is removing the old adhesive, most adhesive removers simply aren't effective. We now carry Peerco 321 adhesive remover in a handy 1 pint container.  It will clean up the old adhesive in just a fraction of the time. Sold here

Adhesive: The best adhesive for seal installation is EC1300L or 3M 08001. We carry adhesive in stock. Sold Here

For instructions on making your door fit perfect new Clevis Pin and Eye Bolt sets are also available to bring your door up to new standards!

Kit Number:

ADS-P301-1

Approval Basis:

FAA-PMA Approved. Part Number ADS1200-301-1

Replaces:

Piper 78741-02, 189-139, 79545-017, 688-431, 19063-02

Aircraft Eligibility:

Piper Models
PA-28-140 S/N 28-20002 Thru 28-7625029
PA-28-150 S/N 28-1 thru 28-7505260
PA-28-160 S/N 28-1 thru 28-7505260
PA-28-180 S/N 28-1 thru 28-7505260
PA-28-235 S/N 28-10003 thru 28-7610020
PA-28R-180 28R-20005 thru 28R-7635017
PA-28R-200 S/N 28R-20005 thru 28R-7635017
PA-28-151 S/N 28-7415001 thru 28-7615001
PA-32-260 S/N 32-1 thru 32-76300001
PA-32-300 S/N 32-40000 thru 32-764029
PA-32R-300 S/N 32R-7680001 thru 32R-7680013
PA-34-200

Typical Lead Time:

Stock

Notes:

Kit includes seal for one door, instructions and seal lube.